Biodiesel and its benefits
Biodiesel is a cleaner burning diesel replacement fuel made from natural, renewable sources such as new and used vegetable oils and animal fats. Just like petroleum diesel, biodiesel operates in compression-ignition engines. Blends of up to 20% biodiesel (B20), mixed with petroleum diesel fuels, can be used in nearly all diesel equipment and are compatible with most storage and distribution equipment. These low-level blends (20% and less) generally do not require any engine modifications, however, users should consult their OEM and engine warranty statement. Biodiesel can provide the same payload capacity as diesel.
Higher blends, even pure biodiesel, which is called 100% biodiesel, or B100, may be able to be used in some engines built since 1994 with little or no modification. However, engine manufacturers are concerned about the impact of B100 on engine durability. Additionally, B100 is generally not suitable for use in low temperature conditions. Transportation and storage of B100, however, require special management.
Using biodiesel in a conventional diesel engine substantially reduces emissions of unburned hydrocarbons, carbon monoxide, sulfates, polycyclic aromatic hydrocarbons, nitrated polycyclic aromatic hydrocarbons, and particulate matter. These reductions increase as the amount of biodiesel blended into diesel fuel increases. The best emission reductions are seen with B100.
The use of biodiesel decreases the solid carbon fraction of particulate matter since the oxygen in biodiesel enables more complete combustion to CO2, and reduces the sulfate fraction, while the soluble, or hydrocarbon, fraction stays the same or increases. Therefore, biodiesel works well with emission control technologies such as diesel oxidation catalysts which reduce the soluble fraction of diesel particulate but not the solid carbon fraction.
Emissions of nitrogen oxides increase with the concentration of biodiesel in the fuel and the increase is roughly 2% for B20. Some biodiesel produces more nitrogen oxides than others, and some additives have shown promise in reducing the increases.
Biodiesel fuel can be made from new or used vegetable oils and animal fats, which are nontoxic, biodegradable, renewable resources. Fats and oils are chemically reacted with an alcohol (methanol is the usual choice) to produce chemical compounds known as fatty acid methyl esters. Biodiesel is the name given to these esters when they’re intended for use as fuel. Glycerol (used in pharmaceuticals and cosmetics, among other markets) is produced as a coproduct.
Biodiesel can be produced by a variety of esterification technologies. The oils and fats are filtered and preprocessed to remove water and contaminants. If free fatty acids are present, they can be removed or transformed into biodiesel using special pretreatment technologies. The pretreated oils and fats are then mixed with an alcohol (usually methanol) and a catalyst (usually sodium hydroxide). The oil molecules (triglycerides) are broken apart and reformed into methylesters and glycerol, which are then separated from each other and purified.
Approximately 55% of the biodiesel industry can use any fat or oil feedstock, including recycled cooking grease. The other half of the industry is limited to vegetable oils, the least expensive of which is soy oil. The soy industry has been the driving force behind biodiesel commercialization because of excess production capacity, product surpluses, and declining prices. Similar issues apply to the recycled grease and animal fats industry, even though these feedstocks are less expensive than soy oils.
Based on the combined resources of both industries, there is enough feedstock to supply 1.9 billion gallons of biodiesel under policies designed to encourage biodiesel use. This represents roughly 5% of on-road diesel used in the United States.
Because little fossil energy is required to move biodiesel, it is a substitute or extender for traditional petroleum diesel, and special pumps or high pressure equipment for fueling are not needed. In addition, it can be used in conventional diesel engines, so special vehicles or engines to run biodiesel do not need to be purchased.
Scientists believe carbon dioxide is one of the main greenhouse gases contributing to global warming. Neat biodiesel (100% biodiesel) reduces carbon dioxide emissions by more than 75% over petroleum diesel. Using a blend of 20% biodiesel reduces carbon dioxide emissions by 15%.
Biodiesel also produces fewer particulate matter, carbon monoxide, and sulfur dioxide emissions, all air pollutants under the Clean Air Act.
Since biodiesel can be used in conventional diesel engines, the renewable fuel can directly replace petroleum products; reducing the country’s dependence on imported oil.
Biodiesel offers safety benefits over petroleum diesel because it is much less combustible, with a flash point greater than 150 °C, compared to 77 °C for petroleum diesel. It is safe to handle, store, and transport.
FONTE: Disponível em:
OEM = montadora
surpluses = excessos
warranty statement = certificado de garantia
All the correlations below between verb and idea are correct according to the text, EXCEPT:
Não foi possível realizar o seu cadastro com a sua conta do Facebook pois o seu email não está confirmado no Facebook.Entendi